American Clay Earth Plaster is a practical, environmentally friendly alternative to cement, gypsum,
acrylic, and lime plasters. It is compatible with the “breathable” construction recommended for both
historic and new buildings. Our plasters have a far longer working time than other plasters, up to several
days if you need it, so you can take your time and work with confidence that the surface won’t “set”
before you’ve achieved just the finish you want. Besides, there’s no waste. You can reuse any excess
plaster, even after you’ve mixed it and it’s dried. Just break it up and rehydrate it. Our plasters can be
troweled on like traditional plasters, but you can also spray them on with a drywall hopper.
|The Center for Green Building, LLC 3309 Fairfield Ave, Bridgeport, CT 06605
Phone: 203-382-0774 Fax: 203-382-0764 Email Us
|American Clay Primer Additives|
Use our Sand Additive to add to our AFM Transitional Primer for best results
as your first coat in the American Clay application process. One bag to one
gallon ratio is all that is required. Stir until completely mixed and then apply.
Add our Up and EZ to your clay as you see fit for best application.
|American Clay Earth Plasters|
American Clay Earth Plasters have a warm beauty of soothing texture and
rich color, far exceeding the interior surfaces produced by traditional paint,
stucco, or other finishes. It's non-dusting, mold and fade resistant,
repairable and moisture controlling. Available in Enjarre, Marittimo,
Porcelina and Loma styles.
Coverage: See our Finishes page above.
| Center for Green Building