:: Installation
General:
Walls:
Ceilings:
- Because UltraTouch is compressed for shipping purposes, give it a quick shake prior to installing.
This will help accelerate the natural rebounding properties of the fibers. - Install UltraTouch between the studs by simply fitting each batt firmly into place. If building codes
require a vapor barrier, it should be applied towards the living area. - Cut or tear the insulation to fit snugly around obstructions such as plumbing, vent lines, and
electrical boxes. Use any left over pieces to fill small openings around windows and doors. - For exterior walls, most climates will require either a 4-mil or 6-mil poly vapor barrier to be installed.
The question of vapor barriers is not answered by Bonded Logic Inc. This issue depends entirely on
your local climate and your local building codes. Please contact your local building code office and
inquire about the recommendation for your area.
Walls:
- UltraTouch cotton batt's are a friction fit product. This means that they are slightly oversized for
standard wall cavities. To install, merely insert the batt between the studding and tuck it in to
ensure a tight fit. Approximate 30% of the batt's in each bag of UltraTouch are perforated for easy
tearing to fit “off-size” cavities.
Ceilings:
- UltraTouch cotton batt's can be layered to achieve higher R-Values in ceiling applications. It is best
to alternate the direction of the batt's in each layer. UltraTouch can be secured to the joists using
either wire or a mesh. This will ensure the batt's remain in place until drywall has been installed.
Cutting:
- UltraTouch cotton batt's are essentially a textile product and are therefore different to
cut then traditional insulating products. The best way to cut UltraTouch with a non-
motorized tool is to use the Insul-Knife.
| We offer Installation Services, email us today to set up a time for an estimate. No job too small. |
|
| The Center for Green Building, LLC 3380 Fairfield Ave, Bridgeport, CT 06605 Phone: 203-382-0774 Fax: 203-382-0764 Email Us |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 |  |  |  |  |
