Gone are the days of the itchy pink stuff. Hempitecture HempWool is an insulation building material that is good for you and our planet. With an R-Value of R-3.7/in, it outperforms our toxic competitors and is made from 92% industrial hemp fiber.
HempWool comes in various depths and widths to meet your needs.
Hempitecture HempWool is 92% hemp fiber and 8% textile polyester. The thermal resistance is identical to the most commonly used batts insulation products. Our insulation does not contain any VOCs since the product is made with no additives and is biobased. The thermal capacity of Hempitecture HempWool is superior to all insulations on the market because of its high density.
HempWool is easy to work with.
Imagine a job site where all the other trades don’t lament about the day the insulation installers come. Messy, itchy, toxic, conventional insulation isn’t a joy for any builder to be around.
HempWool is good for everyone, from the installers, to other tradespeople on the job, to the client, who gets to live in a healthy, well insulated home.
Fully tested, fully trusted.
HempWool Products have been fully tested to meet or exceed all relevant ASTM standards for insulation. Using the benchmark of ASTM, you can trust that Hempwool® will perform and will meet the guidelines of your building jurisdiction.
PLEASE NOTE: THIS IS INSULATION IS NOT NOT COMPRESSED AND CAN BE EXPENSIVE TO SHIP. IT IS HIGHLY RECOMMENDED TO EITHER PICK UP AT THE STORE OR HAVE YOUR SHIPMENT DELIVERED IF YOU ARE WITHIN OUR DELIVERY RADIUS.
Hempitecture HempWool is ASTM Tested to the following standards:
ASTM C209 Density of insulation
Standard test method for cellulosic fiber insulating board
2.18lbs/ft3
/ 35Kg/m3
ASTM C518 Thermal Resistance
Standard test method for steady state thermal transmission properties by means of the heat flow meter apparatus
R-3.69
Thermal Conductivity
Value of the insulating capacity of product designed for thermal performance
0.040W/m.K
ASTM E96
Standard Test Method for Water Vapor Transmission of Materials
0.647 Perms / 37ng/Pa.s.m2
ASTM E1354
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products using and Oxygen Consumption Calorimeter
Ignition Time = 6.67 (sec.)
Average Heat Release Rate (HRR) = 5.74 (Btu/s/ft2) / 65.17 (kW/m2)
Total Heat Release (THR) = 642.8 (Btu/ft2) / 7.3 (MJ/m2)
Heat Release Maximum Rate (PHRR) = 10.98 (Btu/s/ft2) / 124.66 (kW/m2)
Total Smoke Release by Surface Unit (TSR) = 217.26 (ft2/lb) / 44.5 (m2/kg)
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| R-Value | R-7, R-13, R-20 |
Only logged in customers who have purchased this product may leave a review.
Related Products
-
Natural Havelock Wool Insulation Loose Fill
$149.99Loose fill insulation designed to be blown into walls, ceilings, attics, and basement applications. 1 Bag • R4.3 per Inch • 25…
-
AFM Safecoat® Safe Seal
$21.99 – $259.99This multi-use, water-based, low-gloss sealer works for highly porous surfaces such as particleboard, plywood, processed wood and porous concrete. This…
-
AFM Safecoat® Mexeseal
$59.99 – $291.99This low-odor, water-based semi gloss or satin clear sealer works on porous interior tile or masonry surfaces where oil and…
-
AFM Safecoat® Grout Sealer
$17.99This clear, moisture-resistant sealer works for porous tile grout and other cement surfaces. It reacts with and becomes a part…
Reviews
There are no reviews yet.